Anti-theft Alarm Set Defender ST-6 Gold wireless 868 wire GSM RFID LAN WEB APP

MANUALS APP DOWNLOADS

New template with the following additions:

• TCP-IP Browser connection and management

• Connection to 4 Wally light and PiBi series IP cameras for viewing

• Mobile App in Italian

• Home automation management from web or app

• Event management from web or app

• Management of emails and alarm messages from the web or app

• RFID reader included in the control panel

• LCD display with Touch buttons

• 32 wireless + 8 wired zones

• Internal power backup battery

The Defender ST-6 and ST-6 GOLD security systems use the latest sensor technology

and automatisms and is at the same time an anti-theft device, as well as an alarm system in case of fires e

gas leaks, compatible with various types of sensors, wired or wireless.

The product is characterized by its ease of use and rapid learning, through the

voice prompts for the various functions.

The Defender ST-6 and ST-6 GOLD use an advanced encryption system that ensures maximum

safety and reliability, effectively solving the problems of interference, false positives and false

negative, not solvable by other competing systems.

The way they transmit alarm signals, using the high-speed Contact ID standard, is

makes it extremely versatile and compatible with a wide range of products.

ATTENTION: The time of the control panel is acquired via GSM or NETWORK, the telecom cells in some areas of Italy do not communicate the time. It is advisable to use WIND, VODAFONE or POSTEMOBILE. Other operators have not been tested and often use telecom cells.

• Alarm mode: via network or GSM (compatible with GPRS only in certain countries), arming / disarming function, remotely via CMS or SMS, ContactID protocol, notification SMS. You can change the priority of the network or GSM.

• The new version brings a larger display, touchpad keys, indications on the configuration procedure on the LCD, indication of operating status. Operation is even easier and more intuitive.

• The voice menu in Italian allows you to: execute all commands locally or remotely, provide alarm information, operation and event log.

• Environmental control function.

• Silent mode: In silent mode, all lights, backlights, and beeps are disabled.

• The control panel in stand-by is equivalent to a mobile phone, you can make calls through the GSM network or check your balance.

• Zones: 8 types of different zones and 2 types of association models can be used to configure all the radars and accessories of the control unit.

• PGM Output: A programmable output with 5 different types of alarms is available.

• The Audio Doorbell: The doorbell function can be configured as Ding Dong, Welcome, Record or Dee-Dee.

• Remote telephone operation: By calling the alarm control unit, after verifying the password, it is possible to arm, disarm, listen, query the system status and operate electrical switches.

• Voice Alarm: When the device goes into alarm, user preset phone numbers are automatically dialed to report alarm information.

• Wireless zones: each wireless zone can automatically learn the codes or manually encode them via keypad or WEB platform (Defender St-6 GOLD only).

• Wired Zones: User can set the circuit type and response speed, compatible with NO - NC operation modes.

• You can use up to 8 wireless remote controls, 16 electronic switches, 1 wireless doorbell, an unlimited amount of one-way wireless sirens, 1 two-way wireless siren and up to 16 RFID cards.

• Telephone numbers: 2 reserved for the CMS, 4 for users for receiving alarms.

• Status Check: allows you to check the latest 512 recorded alarms, such as tamper alarm, detector alarm, no telephone line, arming, disarming, changing system settings, low battery, low voltage etc. it is also possible to control based on the zone number and the type of alarm.

• Timed arming / disarming: allows you to set all times for automatic arming / disarming.

• Electric control switches: the user can activate an on / off switch remotely via telephone or SMS, or even manually via the panel.

• Programmable zone settings: has a factory setting for each type of

• area. The user can modify all the parameters of the zone type according to his needs.

• Clock: Built-in automatic clock and calendar.

• Password: The panel has an administrator password and 16 user passwords, the administrator password mainly allows system administrators to configure the alarm system; User passwords are for users in daily use for arming / disarming, or remote control. Both the administrator password and the user passwords can be freely changed.

• You can set up to 4 accounts for the CMS.

• Zone identification: after each alarm the alarm zone is displayed directly on the LCD, you can also send the detailed report to the CMS, which will include the alarm locations and the zone type.

• Anti-tamper function: if you try to cut the wire between the detector and the control unit, or cut the telephone line, the device goes into alarm.

• The anti-tampering alarm will also be activated if the panel is deliberately torn off, the tamper on the back of the panel will in fact be triggered.

• Communication test with the CMS: The panel will send an SMS to the CMS at regular intervals to verify that the communication is working.

• Siren options: built-in siren, wired siren, wireless siren. All sirens can be programmed as enabled / disabled when there is an alarm.

• Loudspeaker volume: the volume can be adjusted from the panel using the directional keys

• Wireless repeater function: It is possible to extend the distance between a detector and the panel by adding a suitable wireless repeater.

• Detectors charge level control: the detectors will send a status report to the panel every 1-3 hours, when the battery level reaches a threshold close to low, the corresponding zone number and the low battery symbol will be displayed on the panel and a communication will be sent to the CMS.

INCLUDED IN THE PACKAGE

• Central Defender ST-6 Gold

• Manual in Italian

• 2 Wireless remote controls

• 1 PIR motion sensor

• 1 Magnetic window door sensor

• 230V power supply

• Balancing resistors for wired sensors

• Sensor batteries

• 2 RFID TAG

• Small parts for sensor and control unit installation