Awning and rolling shutter control unit with rain and wind sensor included

Complete set for detecting atmospheric conditions (wind and rain) with control unit with display for viewing data and relay output for controlling motorized awnings or shutters.

Housed in a white plastic box, it allows you to close or open a contact to control an awning, roller shutter or other load.

The relay switches in the event of rain and / or wind above the speed km / h compared to the set threshold.

It has a rotary selector to set the parameters in a simple and immediate way. Continuous display of wind speed on the display.

The sale includes the sensors (wind and rain) and the plug-in power supply.

The sensors must be connected to the device using the appropriate terminal blocks. As they are not polarized elements, it is not necessary to respect any polarity. Relay outputs are available on a three-contact terminal block.

The connections to the existing system are very simple: it is sufficient to connect the relay outputs C and NO in parallel to the curtain rewind button.

INCLUDED IN THE PACKAGE

• 3-blade wind speed sensor with cable and wall fixing bracket

• Rain sensor on conductive plate and cable

• Control unit assembled and tested in a plastic box

• 12V plug-in power supply

ECU SPECIFICATIONS

• Power supply: 12V DC (via supplied plug-in power supply);

• Max absorption: 200 mA;

• Wind sensor: rotating vane anemometer with reed contact output (included);

• Rain sensor: resistive variation plate (included);

• Real-time display of the detected wind speed;

• Minimum detectable speed: 1 Km / h;

• Maximum detectable speed: 99 Km / h;

• Resolution: 1 Km / h;

• Alarm condition signaling by means of LEDs;

• Relay alarm output;

• Possibility of programming the wind alarm threshold;

• Minimum alarm speed: 1 Km / h;

• Maximum alarm speed: 70 Km / h;

• Alarm threshold default setting: 10 Km / h;

• Relay with NO NC and C contact outputs

• Minimum activation time of the relay in monostable mode: 1 second;

• Maximum relay activation time in monostable mode: 60 seconds;

• Default time: 10 seconds;

• Possibility of keeping it constantly active for the entire time the alarm threshold is exceeded;

• Possibility of excluding one of the two sensors.

• Dimensions 125 x 70 x 39h mm

RAIN SENSOR SPECIFICATIONS

• It detects the fall of rain and the presence of conductive liquids

• It has a 90x50x20 mm plastic box as a base under the plate

• Plate size 70x35mm

• Consisting of an inclined grill in the shape of a double comb

WIND SENSOR SPECIFICATIONS

• Transparent 3-blade sensor

• Clean output contact (maximum 30V 0.5A)

• The sensor closes its output contact for a fraction of a second with each revolution of the wind measuring rotor.

• Wind speed measurement by counting complete pulses (revolutions) in the unit of time (with wind at 10Km / h there are 4 contact closing pulses)

• Complete with pole or wall fixing bracket

• 45mm blade radius

• Lap detection by REED relay

• Degree of protection IP44

• Dimensions without bracket 116 x 116 x 96 mm