4G GSM/PSTN Telephone Dialer for Burglar Alarm with SMS, Voice Calls, 4 Inputs and Remote Output Control

The 4G GSM/PSTN Telephone Dialer It is a multifunctional device designed to integrate Alarm reporting, voice calls, SMS and remote control of electrical equipment in a single system.

It is ideal to be connected to burglar alarm systems, security systems, sensors, technical systems and automation devices.

Connectivity 4G allows you to use the mobile network to send SMS and voice calls, while support for traditional PSTN telephone line allows integration with existing systems and power plants.

The different functions can be used simultaneously, making the device suitable not only for security, but also for remote control of gates, boilers, lighting and other equipment.

4G AND PSTN CONNECTIVITY

The updated version supports the 4G mobile network, enabling the use of calling and messaging functions over the cellular network.

The device also features PSTN input, proving particularly useful for integration with burglar alarm control units equipped with a traditional telephone output.

GSM/4G and PSTN functions can be used together or separately, depending on the system needs.

TELEPHONE DIALER FOR ALARM SYSTEMS

When an event is detected on the inputs, the device can:

• send SMS to programmed numbers;
• make voice calls;
• play recorded voice messages;
• distinguish different types of alarm;
• report changes in the status of inputs;
• manage different recipients for SMS and calls.

They are available up to 20 locations for storing telephone numbers, allowing you to configure different recipients for notifications.

4 TRIGGER INPUTS FOR ALARMS AND EVENTS

The device has 4 different activation inputs, which can be used to connect burglar alarm control units, sensors, relays or other equipment.

Trigger 1 – positive activation +12V
Applying +12V to the input can generate SMS sending and calls via mobile network/PSTN with playback of the associated message.

Trigger 2 – positive activation +12V
Second independent input that can be used for a different type of alarm or event, with relative signaling.

Trigger 3 – negative GND activation
It can be used to generate calls and alerts through the configured telephone system.

Trigger 4 – negative GND activation
Allows you to use the input state change to send an SMS notification to the configured numbers.

This last function is particularly useful, for example, to create a power failure report, using a suitable external relay.

In order to be able to report a blackout it is obviously necessary to keep the combiner powered by means of buffer battery or external UPS.

REMOTE CONTROL VIA SMS

The device not only sends alarms, but also allows you to control equipment remotely via SMS.

The outputs can be used, using appropriate external relays when necessary, to control:

• boilers;
• heating systems;
• lights;
• automatic gates;
• shutters;
• electric locks;
• electronic equipment;
• automation systems;
• other electrical loads.

REMOTELY CONTROLLABLE OUTPUTS

Several programmable outputs are available.

Output 1 – impulse command

Activated via SMS command with a pulse of approximately 2 seconds.

The output provides a negative during activation and can control an external 12V DC relay, with a coil connected between +12V and the output.

Output 2 – pulse or ON/OFF

It can be used both as a timed button of about 2 seconds and as a control ON/OFF bistable.

Ideal for remote control of boilers, lighting and other equipment.

Output 3 – pulse or ON/OFF

Second configurable output for impulsive command or ON/OFF via SMS.

It allows you to independently manage an additional device.

GATE OPENER FUNCTION WITH MISSING CALL

One of the most interesting features is the dedicated output for control of automatic gates via telephone call.

By making a call from a previously authorized number, the device recognizes the caller and activates the output for approximately 3 seconds, without having to answer the call.

This way you can use your phone as a real gate opener remote control.

The exit has relay with SPDT contacts – Common, Normally Open and Normally Closed (C/NO/NC), facilitating connection to the control inputs of the gate control units.

You can freely authorize or remove the stored numbers provided by the device.

TWO-WAY AUDIO – LISTEN AND TALK

The combiner integrates microphone and speaker and allows, in the modes supported by the mobile network, audio monitoring of the place where it is installed.

During a call you can use the following functions:

environmental listening
or
two-way talk/listen communication.

The feature can only be enabled for authorized telephone numbers.

It can be useful for remotely checking what is happening in the protected location or for communicating directly with a person present.

CUSTOMIZABLE SMS MESSAGES

The device allows you to associate different SMS messages with events, allowing you to immediately identify the type of alert received.

For example:

INTRUSION ALARM
POWER FAILURE
TECHNICAL ALARM
SENSOR ALARM
CHANGE INPUT STATUS

The default messages can be modified by the user depending on the system.

RECORDABLE VOICE MESSAGES

You can record voice messages that are played automatically when the dialer makes an alarm call.

The device supports recordable voice messages, with message up to approximately 20 seconds according to the expected configuration.

LCD DISPLAY AND KEYBOARD

The backlit LCD display and the integrated keyboard allow you to directly configure the device without the need for external equipment.

You can manage the main settings, telephone numbers and functions directly from the panel.

REMOTE PROGRAMMING AND CONTROL

In addition to local configuration, several functions can be controlled remotely via mobile network.

It is possible, among other operations:

• control the outputs;
• check device status;
• activate or deactivate alarm inputs;
• receive information on the status of inputs and outputs;
• manage functions via SMS.

Sensitive operations are password protected to prevent use by unauthorized users.

APPLICATIONS

The 4G GSM/PSTN dialer can be used for:

• burglar alarm systems;
• alarm systems;
• technical alarms;
• blackout reporting;
• boiler control;
• heating control;
• light control;
• opening gates;
• door and access control;
• home automation;
• remote control of equipment;
• monitoring of technical rooms;
• homes;
• offices;
• shops;
• warehouses and production activities.

TECHNICAL SPECIFICATIONS

Type: 4G GSM/PSTN telephone dialer
Mobile network: 4G
PSTN: supported
Diet: 12V DC, about 100mA
Power supply/battery: not provided
Trigger inputs: 4
Trigger types: positive and negative
Remote control: via SMS
Controllable outputs: 3 remote outputs + dedicated output via call
Exit modes: impulsive and/or ON/OFF according to the output
Gate opener: via call from an authorized number
Gate opener relay: C/NA/NC contacts
Memorable numbers: up to 20
Reports: SMS and voice calls
SMS: customizable
Voice message: recordable, up to about 20 seconds
Display: Backlit LCD
Keyboard: integrated
Microphone: integrated
Speaker: integrated
Remote Audio: two-way listening/talking
Safety: password-protected functions
Monitoring: entry and exit status via SMS

A SINGLE DEVICE FOR ALARM AND REMOTE CONTROL

The combination between 4G mobile network, PSTN connection, remotely controllable alarm inputs and outputs makes this device particularly versatile.

It can be used as a simple telephone dialer for a burglar alarm control unit or become a real alarm system. remote control, allowing you to receive notifications and simultaneously control different devices directly from your phone.