Repellent Mice Martens Rodents electroshock ultrasound car battery home

MANUAL

Defense against mice, martens and rodents with electroshock, high frequency sounds and flashing LEDs and 6 double high voltage contact plates with positive + negative connection. With integrated batteries (4 x AA, not included), independent from the electrical system. No electrical connection to the vehicle or home electrical system required. Modern microprocessor control: high frequency fear signals are emitted irregularly and at random intervals in order to avoid addiction. The device turns on automatically by means of a vibration sensor only when the car is parked. The double bipolar contact plates ensure that the marten still gets an electric shock, even if it is not on a metal base in the car (it just has to touch both contact surfaces on the contact plates at the same time).

Also buy the necessary AA batteries in our store, by entering AA in the search form.

SPECIFICATIONS:

•          Batteries required 4 x AA (UM 3 mignon, alkaline-manganese or similar high quality)
•          Absorbed current Ø approx. 0.25 mA
•          Battery life approx. 1 year based on battery quality.
•          Circuit Breaker There is a circuit breaker on the side of the device.
•          Piezoelectric loudspeaker for high power loudspeakers with vaulted aluminum membrane for wide sound radiation.
•          Sound pressure max. about. 105 dB ± 20%
•          Sinusoidal ultrasound, randomly interrupting and varying the frequency against habit (one pulse approximately every 9 - 30 sec., Approximately 21 - 24.5 kHz).
•          AC-high voltage. 220-260V / DC 3 LED display: flashing to check ultrasound, high voltage + battery.
•          Vibration switch built-in vibration switch, which turns off the scarring of the marten when the engine is running and reactivates it in the park position (engine does not turn)
•          Temperature range approx. -20 to + 80 ° C (also depending on the batteries inserted, which often have a limited temperature range).
•          Approval mark yes, the e1 mark granted by the Federal Motor Transport Authority
•          Size approx. 140 x 100 x 43 mm (without switch)
•          Bipolar high voltage shock plate of size approx. 60 x 60 x 12 mm. Positive + negative contacts on 2 levels.