Small animal deterrent electrified fence SET with 12V DC accessories

MANUAL

SET that allows you to create an electrified fence of excellent quality as a deterrent for small animals. The KIT includes:

• 1 high voltage generator FG025

• 12 insulating supports for roof pole or fence for stainless steel wire (no drilling required)

• 12 Screws 2,9 x 19 mm for the brackets fixing on the roof to the gutter or on the pole

• 6 screws M5 x 25 mm for the roof brackets for connection to the pipe clamp

• 1 hose clamp for rain gutter, 2-parts

• 2 screws M6 x 60 mm with nut for the adhesion of the clamps

• 100 m Uncovered stainless steel wire spool for high voltage

• About . 4m high voltage insulated wire

• 6 stainless steel connection terminals for joining the cables

Electric fence device to repel small animals (martens, dogs, wolves, rabbits, squirrels, mice, rodents, etc.). For fence lengths up to approx. 1 km (without vegetation).

It can be installed using wooden poles and / or insulators with 2 wires or 1 wire with earth pole connection not supplied (operation with 1 wire only). The device can also be installed in eaves, roofs of houses and buildings and in any place where, if properly installed, the device can drive away annoying and unwanted animals.

High voltage pulses: max. 2400 V in cycles of> 1.2 sec.

Extremely low current consumption: Ø 0.008 A.

A 12 V / DC plug-in power supply, output of at least 100 mA or a 12 V car battery> 12 Ah is still required for operation (power supply NOT included). In both cases the electrical cable requires an insulated cylindrical connector measuring 5.5 x 2.1 mm.

The device must be installed in a dry and closed place protected from rain and water and connected to the fence.

In the place of installation it is mandatory to indicate the presence of the fence, for correct operation it is necessary to carefully consult the supplied manual.

EXAMPLES OF INSTALLATION ON ELECTRIFIED FENCE

With double cable

With single cable and grounded pole

Do you need the high voltage generator or accessories such as pole insulators and cable supports? In our store you can find everything here: EBAY | MECTRONICA STORE

SPECIFICATIONS

• 12V DC power supply from power supply or battery (not included)

• Low current consumption only 8mA continuous with 100mA of periodic temporary pulsed consumption

• Interval time between high voltage pulses> 1.2 seconds in accordance with regulations

• Maximum voltage 2400V (2.4 kV)

• Power 0.12J (small animal deterrent)

• Maximum length of the fence 1km

• Dimensions approx. 122 x 72 x 66 mm

• Device in accordance with CE mark

• Made in Germany

• Illustrated manual in English, German and French