Industrial multifunctional RS232 LAN Ethernet WiFi interface converter

UART RS232 to Ethernet LAN and WiFi conversion module complete with RS232 conversion interface, DB-9 female port and DC plug connector for 5V DC power supply.

Allows the use of RS232 devices on a LAN or INTERNET via TCP or UDP on an IP network. It supports multiple operating modes that can be configured via the WEB page and also supports operation as a multifunction WiFi Access Point (WiFI client, WiFi AP…).

If you enter the configuration webpage and click on the HiLink logo you will also get all the options of the router part of the device. In fact, it also contains a complete router equipped with WAN, LAN and Firewall zones, with the possibility of configuring the device to give internet access to third party devices. In practice it is a router with an RS232 serial interface for remote RS232 devices.

WiFi antenna included, DC 5V power supply not included.

USEFUL LINKS MANUAL

Product overview

·         serial to WIFI module, serial to Ethernet module, multifunctional WIFI module from Ethernet to WIFI, serial server module, so that your serial device is easily networked, transparent two-way data transmission, to ensure maximum ease of use and compatibility

·         Integrated 10 / 100M adaptive Ethernet interface module, maximum serial communication transmission rate up to 230.4 Kbps

·         Using the Lei Ling ralink program, the world's leading network chip supplier, the raw materials are used TDK / / Murata and other large manufacturers, to lay a stable and reliable foundation

·         Reliable system core for security and long-running system applications

·         Small size: 40 * 29 (one third smaller than credit card)

·         Operating temperature: industrial grade: -25 ~ 75 ° C.

·         Integrated 360M MIPS CPU, 16M RAM and 4M FLASH and wireless baseband and RF front end and a variety of peripheral buses

·         Support IEEE 802.11 b / g / n via CE and FCC, support transparent protocol data transfer mode

·         supports the vast majority of WIFI encryption and algorithms, WEP / WAP-PSK / WAP2-PSK / WAPI, encryption type WEP64 / WEP128 / TKIP / AES

·         Provide AT + instruction set configuration, provide friendly web config page, through web config

·         External antenna

·         Support wireless work in AP mode and node (station) mode, the real hardware AP, support the Android system of the iPhone mobile phone and all other WIFI connections, support AP and station at the same time as the online function

·         TCP Server / TCP Client / UDP working mode optional, supports network protocol: TCP / UDP / ARP / ICMP / HTTP / DNS / DHCP

·         Support DHCP to get IP automatically, support AP mode work for IP allocation from device

·         serial port is adjustable, maximum support 230400bps

Technical specifications

·         Features: A complete set of wireless router features:

·         Support AP (wireless access point), Client (wireless client), Repeater (wireless relay), Bridge (wireless bridge), Router (wireless router) five working modes

·         AP mode - default operating mode. The device is a wireless access point in this mode, it supports plug and play, no configuration.

·         Router mode: the device is equivalent to a wireless router, wired interface such as WAN, wireless LAN. Multiple wireless clients can share a broadband line over the Internet.

·         Repeater mode: the use of equipment, the wireless relay function to achieve the relay and amplification of the wireless signal, and the formation of a new wireless coverage area, and finally to extend the coverage of the wireless network.

·         Bridge mode: the use of equipment bridging function, first RM04 and front-end wireless network to establish a wireless connection, then send its own wireless signal to form a new wireless coverage, can effectively solve the weak signal and report blind spots and other wireless coverage issues.

·         Client mode: The AP working in this mode is a wireless client for the main AP, which is equivalent to a wireless network card.

·         5V DC power supply via DC plug (5V power supply not supplied!)

·         Dimensions

·         RS232 DB-9 female interfaces, multifunction WiFi, Ethernet LAN and WAN 10/100 ports

·         Hi-Link brand