Outdoor / indoor twilight sensor switch 230V with relay contact output

MANUAL

This electronic twilight switch automatically controls, by means of a dry contact relay, the activation or deactivation of any electrical or electronic device in the presence or absence of detected light. The device has a clean contact output relay with the possibility of controlling a load with a maximum absorption of 3A. The contacts available are Normally Open (NO) GRAY wire, Common (C) GREEN / RED wire, Normally Closed (NC) BLUE wire, for this reason the sensor can operate in two selectable modes depending on the load connection on the relay.

The first mode allows you to access an electric or electronic device (for example lamps) at nightfall and turn them off when daylight returns in a totally automatic way, for this mode it is sufficient to connect one of the two load power wires between the NO contact. and C.

The second mode allows you to access an electric or electronic device (for example lamps) in the presence of daylight and turn them off when evening falls in a totally automatic way, for this mode it is sufficient to connect one of the two load power wires between the NC contact. and C.

The device is powered directly from the 230V AC 50Hz mains voltage through the BLUE / WHITE and YELLOW / BLACK wires.

The device is housed in a completely watertight white plastic container and the circuit and all the electrical parts are embedded in solid resin, making the sensor suitable for outdoor use and completely watertight.

Through external relays it is possible to increase the load that can be controlled by the device.

FEATURES

• 230V AC power supply

• Relay output with clean contacts (NO, C, NC)

• Plastic watertight container with resin circuit

SPECIFICATIONS

• Supply voltage 210-240V AC 50Hz

• Current consumption sensor

• Dry contact switching current MAX 3A (resistive loads), MAX 1A (inductive loads). For higher demands, external relays can be used.

• Approximately 10 LUX nighttime activation threshold

• Approximately 60 LUX nighttime deactivation threshold

• Delay in reaction about 30 seconds

• Operating range from -10 ° C to + 40 ° C

• Dimensions 70x60x23

• Screw connections for installation

• Output on 20cm multi-wire cable: power supply 230V BLUE / WHITE and YELLOW / BLACK wires, relay output Normally Open (NO) GRAY wire, Common (C) GREEN / RED wire, Normally Closed (NC) BLUE wire

• English, German, French manual

• Made in Germany