MOUNTED Timer from 0.1 second to 999 minutes with trigger and micro USB

Multifunction timer from 0.1 second to 999 minutes (adjustable) with 3-digit red LED display, wide operating voltage range (6 to 30 VDC), trigger, micro USB connector for 5 volt power supply. It has seven operating modes, four buttons for settings, reverse polarity protection diode, output relay capable of switching maximum loads of 250 VAC / 10 A and 30 VDC / 10 A. The set time is maintained even in the event of a power failure.

The package includes: the multifunction timer and instructions in ITALIAN.

Operating mode:

•          P1.1: in this operating mode, when the trigger signal is supplied, the relay is activated (if it has been set to “ON”) and starts the count, at the end of the time the relay is deactivated. By supplying the trigger signal again, the count restarts.
•          P1.2: when the trigger signal is supplied, the time count starts, if the trigger signal is supplied again, the count stops, the relay remains active (if it has been set to "ON") and the count restarts from scratch.
•          P1.3: when the trigger signal is supplied, the time count starts, if the trigger signal is supplied again, the count stops, the relay deactivates (if it has been set to "ON") and the count restarts from scratch.
•          P-2: when the trigger signal is supplied, the relay is deactivated (time set in "CL"), the count starts and when the time expires the relay is activated (if it has been set to "ON") for the time set in "OP", once this time has elapsed, the relay is deactivated.
•          P3.1: when the trigger signal is supplied, the relay is activated (if it has been set to "ON"), the count set in "OP" begins, at the end of the time the relay is deactivated and the count set for " CL ". The cycle is repeated for the number of times set in “LOP”.
•          P3.2:  is activated without the trigger signal, once the settings have been completed and the “SET” button is pressed for a long time, the timer starts automatically.
•          P-4: similar to function “P1.1” with the only exception that if another trigger signal is supplied during the count, the relay remains activated while the count restarts from zero.

Technical specifications

•          Power supply: 6 to 30 VDC
•          Consumption: 50 mA
•          Trigger voltage: 3 to 24 VDC
•          Buttons: 4 for settings and operation
•          Output relay: 1, contacts available (on terminal) N.Open / Common / N.Closed
•          Timing range: 0.1 second to 999 minutes
•          Operating temperature: from -10 ° to + 85 ° C
•          Dimensions (mm): 63x38x19
•          Weight: 26 grams