PROTECH ETHERNET CARD WITH MINI WEB SERVER + 4 RELAYS + 4 DIGITAL INPUTS

With the PROTECH module you create your own remote control system and you can manage it via PC, Smartphone and Tablet, wherever you are!

• PROTECH represents a quick and easy way to create a video surveillance system or a remote control to manage lights, shutters, doors, video cameras and systems with sensors.

• It represents the evolution of the FT823M card (Ethernet control 4 inputs and 4 outputs), enriched with new functions and with a completely new interface that makes it usable also by devices such as Smartphones and Tablets.

• I / O EXPANDABLE via I2C BUS

• New mini-PLC functionality! Activation of the 4 relays according to the status of the 4 digital inputs

It has 4 digital inputs and 4 relays (NC and NO contacts), of which you can check their status and activate them via lights and virtual buttons on the appropriate web page (I / O Board). The display of the I / O states occurs in real time, as well as the activation of the relays in the ON, OFF and Pulse modes, the latter mode which will allow you to operate the relays for a preset time ( from 0.5sec up to 5 min) The PROTECH system provides the possibility to expand the number of inputs and relays up to a maximum of 8x8, where the first 8 stands for the number of cards that can be connected simultaneously to the card and the second 8 stands for the number of inputs or relays on board the expansion cards. The WEB interface provides both a management page for an 8-input expansion card (EXPIN) and an 8-relay expansion card (EXPOUT) In the case of a video surveillance system, one of the relays can be used for the activation of an IP camera, whose recovery can be easily viewed on the CAM page of the Web interface.

NOTIFICATIONS: the system, once configured with the SMTP parameters of an e-mail account, allows the sending of e-mail notifications whenever one of the 4 inputs undergoes a change of logic status. Each of the 4 input lines can be enabled for sending notifications

STRENGTHS

• Portability thanks to the integrated web interface. In this way no management SW will be required

• Versatility thanks to the multiple integrated functions

• Ease of installation and use

•             Low cost

APPLICATIONS

• Possible applications:

• Home automation systems to control lights, doors, shutters, gates ...

• Remote control systems for shops, factories, offices, construction sites and so on

• Small / medium video surveillance system

• Integration into complex systems thanks to the use of direct commands

• Applications for mini-PLCs

REMOTE WIRING AND MANAGEMENT

PROTECH must be connected via ETHERNET cable to the LAN or, for example, to a WiFi access point, in order to be visible from all the devices from which it will be managed, whether they are PCs, tablets and smartphones. The simplest solution, especially in a home or office environment, involves direct connection to an Ethernet port of the ADSL router, possibly WiFi. In this scenario, once the device has been configured for routing on the internet, it will be possible to access PROTECH from the Internet and from the local WiFi network (WLAN)

TECHNICAL FEATURES

• 4 digital inputs (active low)

• 4 relay outputs with NO and NC clean contacts, 1A 24VDC-0.5A 120VAC

• I / O expandability up to 68 lines by means of expansion cards to be connected via a special connector on the card

• Integration into complex and centralized systems thanks to the use of direct commands, designed to control PROTECH and all its expansion boards

• Programmability of the duration of the pulses on the 4 relays of the PROTECH and those of the expansions

• Restoration of the state of all relays after the blackout

• Notifications via email of the change of status of inputs

• Mini-webserver and web control interface

• Mini-PLC for the 4 relays on board (activation according to the configuration of the 4 digital inputs)

• Ethernet connector

• I2C serial connection

• Remotely upgradeable web interface

• HTTP, DHCP, SMTP, TCP network protocols

• Sending messages via TCP / HTTP and / or e-mail when the input status changes

• Free access or through login credentials

• Possibility of customization

• Dimensions: 125 x 90 x 25 mm

• Power supply: 12V DC