- Pack
Soil humidity sensor for automatic irrigation control + POWER SUPPLY
This soil moisture sensor activates the garden irrigation pump, the magnetic valve or a clean contact when the soil is dry and turns off when there is not enough moisture in the soil.
You can pay safely by Card, PayPal, Amazon Pay or Bank Transfer
Express shipments with DHL, BRT, GLS
You have 15 days from delivery to return the product if you are not satisfied
This soil moisture sensor activates the garden irrigation pump, the magnetic valve or a clean contact when the soil is dry and turns off when there is not enough moisture in the soil. The measuring head (supplied) must be buried in the ground at the depth where it is to be measured and must be connected to the base device via a cable. Approximately 2m of cable is included, however the sensor cable can be extended up to 20m with a normal 2-pole cable. The device is operated by a supplied 230V power supply with stabilized 12 V / DC output, the circuit absorbs> 130 mA during operation and has a 3.5 mm jack connector.
For example, if the garden needs to be watered at certain times of the day or only on weekdays, it is necessary to put a commercial timer before the power supply and program it accordingly. The soil moisture sensor starts working when it receives power from the mains.
The device is supplied with a 230V wall socket power supply with 12V DC output and jack connector to be immediately operational with the device. Also available the version with 12V DC power supply code M173.
Sequence of operations:
-
Soil moisture is measured after switching on the operating voltage. The contact is closed for about 24 minutes if the ground is too dry.
-
If the ground is moist enough, the device switches to "Pause" for about 24 minutes and takes a new measurement without activating the contact.
-
This operation continues indefinitely as long as the device is powered on.
Specifications:
-
12V DC power supply, absorption
-
Easy installation
-
Power connector on 3.5mm jack (supplied)
-
Normally open clean contact with output max 230V 3A (the capacity can be increased by means of external relays not supplied)
-
Humidity test time about 24 minutes
-
Adjustable soil moisture sensitivity
-
Sensor tips supplied with 2m cable
-
Use of the control unit in a dry environment
-
Dimensions 72 x 50 x 28 mm
-
Plastic box with screw fixing holes
-
English, French, German manual
You might also like