MultiOne GSM GSM remote control and 1 in1 out gate opener with IP BOX

MANUAL | TELLSYSTEM CATALOG | VIDEO PRESENTATION | VIDEO INSTALLATION

Miniaturized GSM module, developed for remote management of electrical systems. Thanks to the universal power supply the device is suitable for a wide range of applications. Simple programming and Plug & Play connection to make installation easier.

Version in IP65 plastic box with wiring

MultiOne GSM is a GSM Communicator Remote Control with gate opener function equipped with 1 optoisolated input and 1 relay output. By inserting a GSM SIM it will be possible to manage the exit in every part of the world and to monitor and receive signals relating to the entry status.

GSM GATE OPENER

With the use of the gate opener we can open any automatic gate with a

simple ring. Just insert a SIM card into the GSM module and record the numbers

phone. When a pre-registered number calls the module, the device recognizes the

telephone number and the user can open the gate or garage door.

Unlimited distance

No more remote controls with limited range. Thanks to technology

GSM you can open the gate or garage door from any

distance. Just make a ring to the GSM module and it will bring you there

opens immediately, wherever you are.

Economic system

Thanks to the internal memory of 1000 numbers the GSM modules is

It is possible to manage access to corporate structures or large condominiums.

With just one module you can replace 1000 remote controls.

Telephone numbers can also be managed remotely.

Universal system

GSM modules are universal products, they adapt to any automatism

and integrate with all electric opening systems.

Just connect the output of the GSM module to the input of the

gate control unit.

Differentiated access permissions

Safe solution as you have to open several gates with just one

product. GSM modules allow you to define access permissions

of users, so we can decide which one user which

passage can open and which one cannot.

REMOTE MANAGEMENT OF ELECTRICAL SYSTEMS

Turn your electronic devices on or off remotely? With an SMS or a call

for example, you can remotely manage the heating in the weekend house, the sauna, the lighting

or the pump. 4 devices can be controlled in parallel.

Add and delete a user

Thanks to SMS commands it is possible to add and delete any

user even remotely.

There are no more remotes or magnetic cards that are not returned.

Output configuration

The GSM module outputs are freely configurable in mode

monostable and bistable.

In the maximum mode the maximum time is 65 000 seconds. Thank you

to SMS commands the configuration of the output can be changed

remotely at any time.

Remote current status request

To know in real time the current status of our system is enough

send an SMS message to the module. The device will respond to us

with an SMS containing the most important information of the module.

Miniaturized GSM module, developed for remote management of electrical systems. Thanks to the universal power supply the device is suitable for a wide range of applications. Simple programming and Plug & Play connection to make installation easier.

1 opto-isolated input

- In the event of an alarm, the module is able to send a message to a telephone number

- The minimum input voltage is 5V, the maximum is 30V

1 NO / NC relay output 230VAC / 24VDC

- The module integrates a relay output on board that can be managed via a free call, with recognition

Caller ID. Telephone numbers 250 or 500 must be saved on the inserted SIM card

in the form. Without caller ID recognition, the output can be controlled by numbers

unlimited

- The output can be NO / NC. The loadability of the relay can be 5A and 230VAC or 24

VDC

- The output can operate in monostable or bistable mode. In case of monostable mode

the maximum activation time is 250 seconds

Programming via Dip switch and SMS

- The basic functions of the module can be set via dip switches. The number to notify

and the activation time of the monostable mode can be configured via SMS

Other

- Plug & Play connection: The device is ready to use, it does not need any

configuration

- Power supply: 16- 24VAC or 10-30VDC

- Sending and forwarding of SMS to 1 phone number

FEATURES

• 1 opto isolated input (voltage)
• 1 relay output 230VAC / 24VDC, NO / NC
• Output control Monostable (250 sec.) Bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS to a predefined phone number
• Exit control of phone numbers saved on the SIM card (250/500), or control without caller ID
• Programming via DIP switches and SMS
• Plug & Play installation: the device is ready to use without programming.
• The module has a relay output which can be controlled with a free voice call using caller identification. Control telephone numbers (250/500) are stored on the SIM card inserted in the module.
• Without caller identification the module can be controlled by telephone numbers.
• The output type can normally be closed or normally open, the maximum loadability is 5A and 230 VAC / 24 VDC.
• The output can operate in monostable or bistable mode; if monostable, the maximum control time is 250 seconds.
• When the voltage arrives at the input, the device sends an SMS to a previously stored number and will send a call to a telephone number upon request. The voltage arriving at the input can be between 5-30 V.
• The settings of the base module are adjustable with the DIP switches. Telephone numbers for notification duration and monostable mode output can be set with SMS commands.

• ·       IP65 plastic box with wiring

The package includes

• Module
• Antenna
• manual
• Warranty

Features in detail

Inputs (+ expander):	1
Output relay (+ expander):	1
Maximum charge output relay:	max. 230VDC @ 5A
OC output (+ expander):
OC maximum charge output:
Telephone numbers for sending notification:	1
Telephone numbers for exit control:	unlimited / 250/500 numbers
Independent signal sent to the Monitoring Center:
Telephone numbers for forwarding incoming SMS:	/ 1
Transmission channel:	GSM
caller identification:
Central Alarm Function (arm / disarm, entry / exit delay)
24h selectable zones:
Adjustable input sensitivity:
Configurable inputs (NO / NC):
SMS with personalized text:
Phone numbers of the surveillance station:
Periodic sending of status reports:
Sending a recorded voice message to phone numbers:
Sending alarm to user's phone number with siren sound:
Built-in internal clock:
Events list / number of stored events:
GSM signal strength check and hourly recording
Contact ID codes in SMS sent to phone numbers (Separately 250 events and 250 zones)
Configurable Contact ID Codes:
Telephone line simulation
Telephone line simulation:
Output activation with free GSM call:
SMS password security:
Programming software (PC, Android):
Programming method:	SMS / DIP Switch
Battery connection options:
Power (standby / GSM transmission):	25mA / 700mA
Simulated line / GSM transmission:
Voltage:	16-24 VAC 10-35 VDC

SPECIFICATIONS

• Power supply: 16-24 VAC or 10-35 VDC
• Standby / maximum consumption:
  • 12V @ 25mA / 700mA
  • 24V @ 15mA / 350mA
• Output relay loadability: max. 230V @ 5A
• GSM modem: SIMCOM 800
• GSM frequencies: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi-Band)
• SIM card: All
• GSM antenna: SMA connector (included)
• Dimensions: 59 x 53 x 21 mm, package size: 132 x 128 x 32 mm
• Operating temperature: -20 ° C - + 50 ° C

IDEAL FOR

• Controls: door, barrier and gate opening
• Automation (air conditioner, heating, sauna, lighting)