Simulador de línea telefónica profesional ProLine GSM para alarmas antirrobo con marcador

Modulo Antenna Spacer Hole temple  Manuale Garanzia

SPECIFICHE

•          Alimentazione: 9-20 VDC
•          Standby: 80 mA
•          Consumo massimo: 1000 mA
•          OC output caricabilità: max. 30V / 400 mA
•          Voltaggio Linea simulata: 30-72 VDC
•          Voltaggio squillo: 72 VDC
•          GSM modem: SIMCOM 900
•          GSM frequenze: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi-Band)
•          SIM card: tutte
•          GSM antenna: connettore SMA (incluso)
•          Dimensioni : 82 x 69 x 25 mm, packed: 132 x 128 x 32 mm
•          Temperatura di esercizio : -20°C – +50°C

IDEALE PER

•          Monitoraggio e simulazione della linea telefonica analogica
•          Simulatore di linea per centrali di allarme
•          Controllo: porta garage / porta e barriera, armare / disarmare centrale di allarme
•          Automazione  (condizionatore d’aria, sauna, illuminazione)
•          Monitoraggio della rete elettrica (230V) insieme alla notifica di invio sulla sua modifica

Professional telephone line simulator that is able to control the existing telephone line. The device is expandable and can convert the Contact IDs of an alarm control panel into an SMS.

 Analog telephone line simulator (PSTN)

 Telephone line surveillance (PSTN)

 2 contact inputs, 1 OC output controllable with 1000 phone numbers

 SMS voice message, sending contact IDs

 Message sent to the monitoring station via GPRS and IP Enigma / SIA protocols

 Possibility of expansion

 Programming via SMS, PC, Android and voice menu

Telephone line simulation

- Line voltage adjustable from 30V to 72V

- Forwarding Contact ID codes via voice call

- Forwarding of most protocols (Contact ID, 4/2, SIA FSK)

The GSM module has 2 inputs

- NO / NC input

- Sending SMS and / or voice call to 8 phone numbers

The device incorporates an OC relay output on board

- The output can be monostable or bistable

- The output can be managed via a call or is activated in the event of an alarm or a

failure

- Manageable with caller ID recognition from 1000 numbers or without unlimited numbers

Output expansion

- The GSM module can be expanded with the Exp Relay, Exp Relay3 and Exp 8IO cards

- Load relay capability: 24VDC @ 1A

- The outputs can be configured and controlled separately

Programming can take place via SMS, software or

Android application

- Thanks to SMS commands, the main parameters can be changed remotely

- Editable SMS and PC security code

- Programming with wire (USB) or wireless (Bluetooth Adapter)

- The software does not require installation

Notification to the alarm reception center

- Sending Contact ID via voice call or GPRS (Enigma, SIA IP)

- SMS or voice message from the 2 inputs

- Power failure and lifetest message

- Contact ID codes and editable zones (250 zones and 250 events)

- It is possible to indicate 2 telephone numbers of alarm receiving center

Other functions of the GSM module

- Contact ID conversion in SMS and sending message to the user

- Synchronization of the internal clock with the GSM network (function depends on the operator)

- Continuous control of power supply and notification in case of loss (requires battery not included)

- Connector to connect the buffer battery, the ProBattery (can be ordered, not included)

- Memory up to 16 000 events, GSM signal monitoring with graph

- Forwarding of incoming SMS messages to a telephone number

- Anti Jammer function for GSM signal masking

ADVANTAGES

• The device constantly monitors the status of the telephone line. If the PSTN network goes into error or is interrupted, the ProLine GSM can supply a completely simulated telephone line through the GSM network.

• If the input is changed, the communicator transmits to the user and / or to the SMS monitoring station, voice call and contact ID (maximum 8 user numbers). The notification event can be: signal arriving at input, tamper, external power monitoring and been alive.

• The GSM device is able to generate SMS messages from ID contacts to be forwarded to the user (250 zones, 250 users)

The exit control with free call can be obtained from unlimited numbers. Using the telephone number identification we can control the output through 1000 user phone numbers, stored in the module's internal memory. The output can be monostable (up to 65000 sec.) Or bistable. The module can be expanded via relay outputs.

• Programming can be performed via SMS, Android (Bluetooth) or PC (USB or Bluetooth) with the ProRead software.

• SIM functions: forward the incoming SMS to a predefined phone number; warning message on the expiration time of the SIM card.

• The battery allows you to indicate power failure and allow the device to be used for 4 hours.

• If the module recognizes a Jammer device (device that interferes with the GSM signal), the module tries to send the alarm through the PSTN line. Moreover, it can also activate the output.

The package includes

  Module

  Antenna

  spacer

  Hole temple

   Manual

  warranty

SPECIFICATIONS

• Power supply: 9-20 VDC

• Standby: 80 mA

• Maximum consumption: 1000 mA

• OC output load capacity: max. 30V / 400 mA

• Simulated line voltage: 30-72 VDC

• Ringing voltage: 72 VDC

• GSM modem: SIMCOM 900

• GSM frequencies: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi-Band)

• SIM card: all

• GSM antenna: SMA connector (included)

• Dimensions: 82 x 69 x 25 mm, packed: 132 x 128 x 32 mm

• Operating temperature: -20 ° C - + 50 ° C

IDEAL FOR

• Monitoring and simulation of the analog telephone line

• Line simulator for alarm centers

• Control: garage / door and barrier door, arm / disarm alarm center

• Automation (air conditioner, sauna, lighting)

• Monitoring of the electricity network (230V) together with notification of dispatch on its modification