GSM telecontrol 2 IN 2 OUT bidirectional programmable remote control

USEFUL LINKS ITALIAN MANUAL | ENGLISH MANUAL | EXAMPLE OF TRANSFERRING 2 CARD CONTACTS | CARD DRIVERS AND SOFTWARE

Two-way remote control system that uses the GSM network for activations and controls. It has two relay outputs with monostable or bistable operation and two opto-isolated alarm inputs. Possibility of memorizing 8 numbers for sending alarms and 200 numbers for the gate opener function. All settings are made via SMS or locally via PC (via optional FT782M interface not included). Power supply between 9 and 32 Vdc, maximum absorption 1A. The package includes: the assembled and tested device with the GSM module with SIM800C and GSM antenna.

Optionally available the box code BOXTDG

SEND CONTACTS BIDIRECTIONAL

If you wish to make a transfer of up to 2 bidirectional contacts (2 for sending and 2 for receiving and vice versa) purchase two pieces and through the  attached manual you can configure them to exchange, via SMS, signals on the change of input status of one to control the relay of the second and vice versa.

NOTE:

The device uses only the GSM network, therefore not being able to work on the UMTS network, it is not compatible with all those SIMs that work only with the latter network. It can therefore work without problems with SIMs from the company WindTre, TIM, Vodafone, Iliad.

Application example in attached image

Typical applications

In SMS mode:

- Anti-theft systems for civil and industrial buildings

- Anti-theft systems for vehicles

- Control of air conditioning/heating systems

- Control of pumps and irrigation systems

- Control of industrial plants

In voice call / gate opener mode:

- Opening gates

- Access control

- Reset circuits

Technical features

GSM/GPRS module: SIM800C

Frequency band:

- Quad band: GSM 850, EGSM 900, DCS 1800, PCS 1900. The 4 frequencies can be searched automatically, or set by AT command “AT+CBAND”.

- Compliant to GSM Phase 2/2+

GPRS connectivity: multi-slot class 12 (default)

Transmission power:

- Class 4 (2 W) at GSM 850 and EGSM 900

- Class 1 (1W) at DCS 1800 and PCS 1900

Power supply: from 9 to 32 Vdc (1 A); or a 800÷1.000 mA/h lithium-ion battery (not included)