Power control 230V AC 10A manual inductive ohmic loads, PWM, 0-10V input

MANUAL

Power regulator for 230 V / AC users such as motors, lamps, many dimmable LEDs etc. The controller is overload proof and can be controlled via a potentiometer (100K lin.), A control voltage (0-10 V) or with PWM signals (0 - 100%, 100 - 10,000 Hz).

Intended use:

Control of ohmic or inductive loads at 230 V / AC 50 - 60 Hz, up to max. 10 A current consumption. The electrical loads must be adequate for phase angle control.

Compatible with our PWM LED Controller of the MBBUS series suitable for managing the system as an RS485 device and controlling multiple light points or motors with PWM regulation directly from home automation systems or automations. Search MBBUS in our portal to discover all the potential.

SPECIFICATIONS

•          Operating voltage 220 - 230 V / AC 50 - 60 Hz
•          Max. Connectable load 10 Ampere (2,300 W)
•          Phase angle control mode control
•          Soft-start ignition
•          Operating display, 2-color LED overload display
•          Control options with potentiometer 100 K lin or control voltage 0-10 V / DC or PWM signal 3 - 24 V 100 - 10,000 Hz
•          The control signal input is completely isolated from the load control circuit.
•          Connections Plug contacts 6.3 mm and 2.8 mm flat plugs
•          Size approx. 87 x 60 x 33 mm

Power regulator for 230 V / AC utilities such as motors, lamps, many dimmable LEDs etc. The controller is an overload test and can be controlled via a potentiometer (100 K lin.), A control voltage (0-10 V) or with PWM signals (0 - 100%, 100 - 10,000 Hz).

Intended use:

Control of ohmic or inductive loads at 230 V / AC 50 - 60 Hz, up to max. 10 A current consumption. Electrical loads must be necessary for phase angle control.

Compatible with our MBBUS series PWM LED controller suitable for managing the system as an RS485 device and controlling multiple light points or PWM-regulated motors connected by home automation or automation systems. Search our portal to discover all the potentials.

SPECIFICATIONS

• Operating voltage 220 - 230 V / AC 50 - 60 Hz

• Max. Load connectable 10 Ampere (2,300 W)

• Phase angle control mode control

• Soft-start ignition

• Operating display, 2-color LED overload display

• Control options with 100 K lin potentiometer or 0-10 V / DC control voltage or PWM signal 3 - 24 V 100 - 10,000 Hz

• The control signal input is completely isolated from the load control circuit.

• 6.3 mm and 2.8 mm flat spine connections

• Dimensions approx. 87 x 60 x 33 mm